FUJI AS-Interface_AS-i AS-Interface cables

The AS-i cable is a two-core cable specially designed to connect AS-i devices. The yellow AS-i cable supplies 30V DC power to sensors and transfers data. The black AS-i cable can be used for 24V DC actuators (e.g., solenoid valves).

•	A trapezoidal cross section is adopted to prevent polarity reversal.
•	Both kinds of cable are available to suit environmental conditions: general-purpose (EPDM) and oil-tight (TPE) use.
•	The connection uses the insulation piercing technology (IEC 60352-6).
•	The cable’s insulation recovers after the connected slaves are detached.
•	Conforms to IEC 62026-2
•	Approved by UL and CSA (Oil-tight (TPE) cable).
•	RoHS compliant products.

FX3CA

Y(Yellow)
FX3CA

B (Black)

Type	FX3CAEY	FX3CATY	FX3CAEB	FX3CATB
Application	AS-i communications, 30V DC		24V DC external power supply
Environmental condition	General-purpose use	Oil-tight use	General-purpose use	Oil-tight use
Cable color	Yellow		Black
Cable sheath material (DIN VDE 0207)	EPDM	TPE	EPDM	TPE
Sheath color of core	Brown (AS-i (+)), Blue (AS-i (–))		Brown (24V DC (+)), Blue (0V)
Core cross-section (IEC 60228)	2 x 1.5mm²		2 x 1.5mm²
Cable length per packing	100m roll		100m roll
Operating temperature	–25 to +85˚C	–30 to +105˚C	–25 to +85˚C	–30 to +105˚C
Bending performance (IEC 60227)	No break after 30,000 back and forward movements
Behavior in fire (UL 1581)	Flammable	Flame-resistant	Flammable	Flame-resistant
Ozone and weather resistance	Non-resisting	Resisting	Non-resisting	Resisting
Oil resistance	Non-resisting	Resisting	Non-resisting	Resisting
Water soluble cutting fluid resistance	Resisting	Non-resisting	Resisting	Non-resisting
Approval	-	UL758, cUL, AWM style 2376	-	UL758, cUL, AWM style 2376