FUJI AS-Interface_AS-i Masters MICREX-SX

The NP1L-AS2 AS-i master, mounted on the base unit of the MICREX-SX series of SPH, communicates with devices on the AS-i bus.

.	Up to 12 AS-i masters can be connected to one SX-bus configuration.
.	Up to 62 A/B slaves can be connected.
.	Up to 31 analog slaves can be connected.
.	Addition of notification function of peripheral error.
.	The slaves’ configuration can be registered by a switch on the front of the AS-i master.
.	The status of the AS-i bus is indicated by the LEDs on the AS-i master, e.g., showing disconnection of slaves, AS-i power supply failure, and automatic addressing availability.
.	The 7-segment LED indicates the addresses of disconnected slaves (in protect mode) and configured slaves (in configuration mode).
.	AS-i specification: V2.1

NP1L-AS2
(AF00-112)

Type		NP1L-AS2
Communications specifications	Maximum connectable slaves	62 A/B slaves for V2.1 (addresses 1A to 31A, 1B to 31B) 31 standard slaves for V2.0 (addresses 1 to 31, Analog slaves are treated in the same way as standard slaves.)
	Maximum No. of input/output points	434 points (When connecting A/B slaves: 248 input and 186 output points) 248 points (When connecting standard slaves: 124 input and 124 output points)
	Network topology	Tree, line, and star structure
	Max. cable length	Up to 100m (extendable up to 300m via repeater)
	Transmission speed	167kbps
	Transmission cable	AS-i cable (yellow), or parallel cable (2 x 1.5mm²)
	Cycle time	Approx. 10ms (with 62 slaves connected), Approx. 5ms (with 31 slaves connected)
	Power supply for communications	AS-i power supply (30V DC)
	AS-i current consumption	100mA or less
Function specifications	No. of slots occupied	1
	Maximum connectable AS-i masters	12 per configuration
	Internal current consumption (at 24V)	100mA or less
General specifications	Insulation resistance	10M or more with 500V DC megger, between external terminals and FG
	Dielectric strength	445V AC for 1min, between external terminals and FG
	Operating temperature	0 to +55˚C (no icing or no condensation)
	Storage temperature	-25 to +70°C (no icing or no condensation)
	Relative humidity	20 to 95% RH (no condensation)
	Pollution degree	2 (no conductive dust)
	Atmosphere	No corrosive gases, no organic solvent adhering to the master
	Vibration resistance	Amplitude: 0.15mm, constant acceleration: 19.6m/s2 for 2 hours in each direction
	Shock resistance	147m/s2 for 3 times in each direction (Peak acceleration)
	Noise immunity	Noise simulator method: Rise time 1ns, pulse width 1µs, 1.5kVp-p
	Electrostatic discharge resistance	Contact discharge method: ±6kV, Aerial discharge method: ±8kV
	Degree of protection (IEC 60529)	IP30 (installation inside panel)
	Cooling method	Natural cooling
	Mass	Approx. 180g
	Approval	CE