-
Fe e-Front runners FUJI ELECTRIC FA COMPONENTS & SYSTEMS
 
   
Top Product Infomation Technical Infomation Sales Infomation Corporate Guide Contact US Site Map
Sales Distribution
After Service Network
What is AS-i?
Products
Master
Slave
Safety at Work
AS-i Cable
AS-i Power Supply
Accessories
Download
Inquiries
Site Map
AS-i Top page
  FUJI AS-Interface_AS-i AS-i power supply

FP1AB series ?AS-i?

Description

The AS-i power supply provides electric power for slaves and sensors through the AS-i communication line. This power supply allows data and power transmission on one line. This unit is also used to extend the transmission distance using the repeaters.

• AS-Interface standard (IEC 62026-1) compliant power supply
• UL and CSA standard certified
• CE Marking conformed
• RoHS compliant
• Output short-circuit protective function incorporated
• Overvoltage protective function incorporated
• Secondary circuit insulation conforms to SELV (EN 60950), PELV (IEC 60364-4-41)
• 2.8A and 4A models conform to harmonics regulation (EN61000-3-2 Class A)
• 4A model incorporates ground-fault detection function
• DIN rail mounting
• English and Japanese instraction manual are included
FP1AB-KP2P8 FP1AB-KP004 FP1AB-KP008

Type numbers
Category Application Specification Type
Rated input voltage
Rated output current
AS-i power supply Power supply for AS-i communications 100-120VAC/220-240VAC changeover 2.8A
FP1AB-KP2P8
4A FP1AB-KP004
8A FP1AB-KP008

Specifications
Type FP1AB-KP2P8 FP1AB-KP004 FP1AB-KP008
Rated input voltage
(Changeover switch position)		 100-120V AC / 220-240V AC
(at 115V / 230V)
Input voltage range 85-132VAC / 184-264VAC
Input current (115V AC/230V AC) 2.0A/0.9A 2.7A/1.3A 6.0A/2.8A
Input frequency range 47-63Hz
Efficiency (230V AC, full load) typ. 90.5% typ. 90% typ. 92%
Rated output voltage 30.55V DC ±3% 30.5V DC ±3% 30.55V DC ±3%
Rated output current (Current range)
Derating (60 to 70°C)		 2.8A (0-2.8A) 4A (0-4A) 8A (0-8A)
derating
(70°C, 75% load)		 derating
(70°C, 75% load)		 derating
(70°C, 75% load)
Overcurrent protection >3.2A (Auto reset) >4.2A (Auto reset) >8.4A
(Manual reset)
Overvoltage protection <55V
Connectable wire (Input, output) Twisted wire *1: 0.5-4mm2 (AWG = 20-12)
Solid wire: 0.5-6mm2 (AWG = 20-10)
Operating temperature -10 to +70°C (no icing) (Derating at +60 to +70°C)
Humidity <90%RH (No condensation)
Storage temperature -25°C to +85°C (no condensation)
Vibration resistance (IEC68-2-6) 2-17.8Hz ±1.6mm
17.8Hz-500Hz 19.6m/s2
Shock resistance (IEC 68-2-27) 147m/s2 (6ms), 98m/s2 (11ms)
Protection against electric shock (IEC 60950) Class 1
Degree of protection (IEC 60529) IP20
Approvals UL508, UL60950, CSA-C22.2No.60950,
CE-Marking（EN60950） AS-i Association certified
*1 Stick terminal (Ferrule) that matches wire size can be used.
Release time
December 2006
For details, please contact your FUJI sales representative.

Page top