Fe e-Front runners FUJI ELECTRIC FA COMPONENTS & SYSTEMS
 
   
Top Product Infomation Technical Infomation Sales Infomation Corporate Guide Contact US Site Map
Sales Distribution
After Service Network
What is AS-i?
Products
Master
Slave
Safety at Work
AS-i Cable
AS-i Power Supply
Accessories
Download
Inquiries
Site Map
AS-i Top page
FUJI AS-Interface_AS-i AS-i power supply
FP1AA series  

Description

The AS-i power supply provides electric power for slaves and sensors through the AS-i communication line. This power supply allows data and power transmission on one line. This unit is also used to extend the transmission distance using the repeaters.

• FP1AA has a wide range of rated input voltage 100 to 230V AC.
• Overcurrent protective function is built-in.
• Conforms to the following EC Directives: Low Voltage Directive (No.73/23/EEC): EN60950 EMC Directive (No. 89/336/EEC): EN50081-1, EN50082-2
• IEC rail mounting

FP1AA-JNW072
(KK01-242A)

Ratings and specifications
Type FP1AA-JNW072
Application AS-i communication
Rated input voltage 100 to 230V AC (continuous)
Operating voltage range 85 to 235V AC
Rated frequency 50/60Hz (47 to 63Hz)
Power dropout tolerance (at 100V AC) 20ms or more
Rated input current (100/200V AC) Approx. 1.9/1.0A
Inrush current (230V AC) 40A or less
Efficiency 80% or more
Output power 72W
Rated output current (current range) 2.4A (0 to 2.4A)
Current derating at 50˚C or more *1
Output short-circuit protection Auto-reset
Protection class (IEC536) Class I
Secondary side insulation (EN60950) Yes (SELV: Safety-Extra Low Voltage)
Radio interference suppression (EN55011) Class B
Degree of protection (IEC60529) IP20
AS-i cable connecting method Spring-clamp terminal
Shock resistance (IEC68-2-27) 150m/s2 (11ms)
Vibration resistance (IEC68-2-6) 10 to 55Hz, 0.5mm one-way amplitude
Mass Approx. 700g
Approvals cUL (UL1950, CSA950), CE, TÜV
Note : Fuse not replaceable

Page top