|
|
| Item |
Description |
| Configuration software |
This software is used to configure and set up the safety monitor on the PC (IBM PC/AT or compatible). A separately
sold connection cable (3RK1901-5AA00) is required to make settings.
(PC requirements)
 |
· |
A Pentium® or newer Intel® processor or a compatible AMD® or Cyrix® processor |
| · |
CD-ROM drive |
| · |
Mouse (recommended) |
| · |
RS-232C serial interface (9-pin D-sub plug) |
| · |
OS: Microsoft® Windows 95/98/ME/2000/XP® |
|
| Cable set |
This cable connects the safety monitor and PC (IBM PC/AT or compatible). The PC connects with the RS-232C serial
interface (9-pin D-sub plug). |
| Input jumper for K45F |
This input jumper makes one channel of the safety slave always ON.
This input jumper is used one when only channel out of two channels is used.
With this jumper, Pin 1 and Pin 2 in K45F are connected internally. |
| Sealable cap |
This cap is the spare of the protective cover for the configuration interface of the safety monitor. Each bag contains five
caps. The safety monitor is provided with a single sealable cap. |
|
| * |
Intel® and Pentium® are registered trademarks of Intel Corporation of the USA.
Microsoft® and Windows 95®, Windows 98®, Windows ME®, Windows 2000®, and Windows XP® are registered trademarks of Microsoft Corporation of the USA.
Other companies and product names described are trademarks or registered trademarks of their respective companies. |
|
