FUJI AS-Interface_AS-i Slave AS-i motor starter slave, Standard Slave

The FE16D slave incorporates a reversing motor starter for up to 2.2kW, having a sturdy IP65 structure to make it suitable for severe environmental conditions. The FE16D can be used outside the control panel, thus helping to reduce the number of relay boxes and the size of the panel.

.	The starter slave can be easily connected to the ASInterface flat cable by insulation piercing connectors.
.	The power cable can be easily connected by a single-action connector.
.	A translucent door, which can be padlocked, simplifies addressing and resetting.
.	Designed for versatile application, with a motor range of 0.1 to 2.2kW at 200V AC and a thermal overload relay range of 0.1 to 7A.
.	AS-i specification: V2.0

FE16D-SJ13RGNE12
(KK01-136A)

Type

FE16D-SJ13RG*E12

Built-on thermal overload relay: *

N: TR-0NZ716, E: TK-0NZ716

Motor capacity:

…20 to 25 (0.1 to 2.2kW)

Heat element:

…A to V (0.1-0.15A to 7.0-11.0A) at 200V AC

0.1kW 0.1-0.15A
0.15-0.24A
0.24-0.36A
0.36-0.54A
0.48-0.72A
0.2kW 0.64-0.96A
0.8-1.2A
0.95-1.45A

20 A
20 C
20 E
20 G
20 H
21 J
21 K
21 L

0.4kW 1.4-2.2A
1.7-2.6A
0.75kW 2.2-3.4A
2.8-4.2A
1.5kW 4.0-6.0A
5.0-8.0A
2.2kW 6.0-9.0A
7.0-11.0A

22 M
22 N
23 P
23 R
24 S
24 T
25 U
25 V

Slave type

Standard slave

Number of inputs/outputs

4 inputs /4 outputs (IN3, IN4, OUT3, OUT4: not in use)

AS-Interface profile (I/O, ID)

7, F

Operating voltage (in acc. with AS-Interface specification)

26.5 to 31.6V DC

Current consumption

50mA DC or less

Degree of protection (IEC60529)		IP65
Connector for power cable		See page 95 for recommended cables.
Operating temperature		0 to +55˚C (no icing or no condensation)
Storage temperature		−25 to +70˚C (no icing or no condensation)
Connection of communication cable		Via yellow AS-i cable by piercing connector
External power supply method		Via black AS-i cable by piercing connector
Electrical protection for AS-Interface	Reverse polarity protection Electrostatic discharge resistance Electromagnetic field noise immunity Burst noise	Built-in Contact discharge method: ±4kV, Aerial discharge method: ±8kV, IEC61000-4-2 (Class B) 80 to 1000MHz, Electric field strength: 10V/m, IEC61000-4-3 (Class A) 2kV (Class B)/1kV (Class A), IEC61000-4-4
Shock resistance (IEC68-2-27)		50m/s2 (11ms)
Vibration resistance (IEC68-2-6)		10 to 55Hz, 0.25mm one-way amplitude
Mass		Approx. 2.2kg (including mounting plate)
Addressing method		Can be made with an addressing unit (FL1HA-E) via addressing cable (FX9Y002) connected to the addressing jack on the slave front. Connecting the addressing cable to a slave will disconnect the slave from the AS-Interface.
Approval		CE