|
 |
| • |
Conformity with various power voltages worldwide (1-phase 100V, 1-phase 200V, 3-phase 200V, 3-phase 400V) |
| • |
Applicable motor capacity 0.1kW to 3.7kW |
| • |
Easy setting, simple wiring |
| • |
Conformity with IP20 |
Input signal
4-bit input acceptable
Bitwise function allocation can be made by function code data setting. |
|
| • |
Forward rotation, stop command |
| • |
Reverse rotation, stop command |
| • |
Alarm reset signal |
| • |
Multi-frequency selection |
| • |
Acceleration/deceleration time selection |
| • |
Coast-to-stop command |
| • |
Jogging operation Any of the above functions is selectable. |
Optimized functions best suited for traversing conveyance
High starting torque (150% or more)
Braking unit built-in (0.4kW or more)
Braking resistor built-in model (Semi-standard)
Trip-free operation (Current limiting function)
Output signal
2-bit outputs can be issued.
Bitwise function allocation can be made by function code data setting.
| • |
Alarm output (for any fault) |
| • |
Running signal |
| • |
Frequency arrival signal |
| • |
Current limiting signal |
| • |
Motor overload early warning signal |
| • |
Low level current detection signal Selective allocation from the functions above |
Three types of function code data settings
Keypad
Remote keypad with data copy function (Option)
Inverter loader software
Nominal applied
motor (kW) |
Input power |
| 3-phase 200V |
3-phase 400V |
1-phase 200V |
1-phase 100V |
| 0.1 |
 |
- |
|
|
| 0.2 |
|
- |
|
|
| 0.4 |
|
|
|
|
| 0.75 |
|
|
|
|
| 1.5 |
|
|
|
- |
| 2.2 |
|
|
|
- |
| 3.7 |
|
|
- |
- |
|
|
